Menu
Close
Close
Temperature and humidity measurements

Platinum-rhodium thermocouples

Range: 0 °C to 1800 °C

Calibrations using ITS-90 fixed points

Calibrations are performed using ITS-90 fixed points, high temperature fixed-point and/or the wire-bridge technique. NPL’s platinum-rhodium (Pt-Rh) thermocouple calibration service is UKAS (ISO 17025) accredited and is typically achieved by measuring a customer thermocouple at two or three reference temperatures. The results are then used to create an equation to describe the thermocouple voltage (emf) versus ITS-90 temperature.

The resulting calibration equation applies over the whole temperature range of interest, and a formal certificate is provided. Type R and S thermocouples are only suitable for calibration up to 1600 °C, whereas Type B thermocouples may be calibrated to 1800 °C.

The calibration uncertainty (k = 2) can be as low as ±0.3 °C over the range 0 °C to 1100 °C, rising to ±0.55 °C at 1330 °C, ±0.72 °C at 1500 °C, and ±1.2 °C at 1800 °C.

The types of temperature references used include:

ITS-90 fixed points 

These are the reference temperature artefacts, as specified in the ITS-90, for the practical realisation of the temperature scale. At NPL, the Zn (420 °C), Ag (962 °C) and Cu (1085 °C) fixed points are used for UKAS accredited thermocouple calibrations.  

High temperature fixed-points 

These artefacts provide reference temperatures for contact thermometry, above those specified in the ITS-90. They are made from a eutectic alloy of metal and carbon. At NPL, the Co-C (1324 °C) and Pd-C (1492 °C) fixed points are used for UKAS accredited thermocouple calibrations. 

Wire-bridge technique 

This is an invasive technique, which involved placing a piece of pure metal directly in/around the thermocouple hot junction. The metal is then melted and the phase-transition temperature is sensed directly. This technique has wider uncertainties, but can be used to reach temperatures otherwise unavailable. At NPL, Au (1064 °C), Pd (1555 °C) and Pt (1768 °C) wire bridges are used for UKAS accredited thermocouple calibrations. 

Don’t see what you are looking for? Our diverse skill set enables us to provide bespoke solutions. Please contact us to discuss your requirements.

Contact us

To buy the instrument

Are you interested in Au/Rh thermocouples?

Work with us

Our research and measurement solutions support innovation and product development. We work with companies to deliver business advantage and commercial success.
Contact our Customer Services team on +44 20 8943 7070